Chemical Transformation Unit / Biofuel Micro-Factory
Research Prototype / Research Use Only (RUO)
DESCRIPTION
This Chemical Transformation Unit / Biofuel Micro-Factory, developed by Autarcycle Inc., is a Research Use Only (RUO) prototype designed to efficiently produce various bioproducts. In normal operation, it can run at up to 400 °C, 3,700 psi and 24 L/h. These values are maximum operating limits; actual throughput depends on the chemical transformation and the recipe used. Only qualified personnel may operate it. It consists of two ECP 2200 high-pressure pumps, a tubular setting and an automaton.
PARAMETERS
- Maximum flow capacity:
- 24 L/h (approximately 210,000 L/year)
- Maximal Normal Operation Pressure:
- 3700 psi
- Maximal Normal Operation Temperature:
- 400 °C
- Power supply
- 20 A – 240 V
- Dimensions (w x h x d)
- CTU: 36 3/4’’ x 71 1/4” x 18 3/8”
- AUTOMATON: 30’’ x 26 3/4’’ x 9’’
- Operational environment
- Indoor and ATEX use only.
- Altitude: up to 2,000 m
- Temperature: 5 to 40 °C (should be stable)
- Humidity: maximum relative humidity 80 % for temperatures up to 31°C decreasing linearly to 50 % rel. humidity at 40°C.
- Voltage fluctuations: up to ±10 % of nominal voltage.
- Overvoltage: category II.
- Pollution degree: 2.
AUTARCYCLE’S PROPRIETARY
TRANSESTERIFICATION PROCESS
Waste Management
- No solid or liquid waste
- Used triglyceride filters from pre-treatment can be used as fuel
- Process gas emissions (< 1 wt%): composition (% v/v)
- O2 : 16.6 – 18.7
- N2 : 46.9 -48.9
- CH4: 1.1 – 1.4
- CO : 7.4 – 15.2
- CO2 : 2.8 -15.8
Automated maintenance (on fully equipped units).
For more information, see: Biofuel Micro-Factory using Autarcycle’s Proprietary Transesterification Process, A Post-Petrol Era For Diesel Engines
DOCUMENTS

Persistent innovation for a sovereign industry.



